Subject: Material Safety Data Sheet - Product #61044122
From: <Saved by Windows Internet Explorer 7>
Date: Mon, 29 Sep 2008 08:08:04 -0700

926469 *MATERIAL SAFETY DATA SHEET*
----------------------------

MEDICAL EMERGENCY ONLY, 24 HOUR SERVICE: 1-800-328-0026
Medical Calls from Outside of the USA: 612 292 4064 (USA)

ECOLAB PROFESSIONAL PRODUCTS For Product Information,
DIVISION OF ECOLAB INC. Call: 1-800-247-5362
Ecolab Center, ST. PAUL, MN 55102 Date of Issue: May 14, 1997
=======================================================================
1.0 IDENTIFICATION /
-------------------

1.1 Product Name: HUNTOLENE DUST MOP TREATMENT
1.2 Product Type: Aerosol Spray for Dust Mops (61044122)
1.3 Hazard Rating: Health - 2 Fire - 4 Reactivity - 0
- - -
-----------------------------------------------------------------------
++ Any Substances for SARA 313 Reporting Are Preceded by # ++
-----------------------------------------------------------------------
2.0 HAZARDOUS COMPONENTS / (ppm)
-------------------------
PEL TWA
--- ---
2.1 Isoparaffinic solvent 64742-47-5 60-70 No No
2.2 Heavy naphtha 64741-65-7 10-15 500 100
2.3 Petroleum gas 68476-85-7 15-20 1000 1000
2.4 Mineral oil 8042-47-5 1-5 5 mg/m3
-----------------------------------------------------------------------
PEL = OSHA 8 Hour Average in Air TWA = ACGIH 8 Hour Average in Air
-----------------------------------------------------------------------
3.0 PHYSICAL DATA /
------------------

3.1 Appearance: Aerosol with colorless, misty spray
3.2 Solubility in Water: Not determined
3.3 pH: Not Applicable
-----------------------------------------------------------------------
4.0 FIRE AND EXPLOSION DATA /
----------------------------

4.1 Special Fire Hazards: Contents under pressure. Spray is very
flammable.
4.2 Fire Fighting Methods: Water may be used to keep fire-exposed
containers cool.
-----------------------------------------------------------------------
5.0 REACTIVITY DATA /
--------------------

5.1 Stability: Store as a Level 3 aerosol (NFPA 30B)
5.2 Conditions to Avoid: Do not spray near fire or open flame. Do not
store above 120 deg F. Exposure to sunlight or other heat may
cause bursting.
-----------------------------------------------------------------------
6.0 SPILL OR LEAK PROCEDURES / USE PROPER PROTECTIVE EQUIPMENT
-----------------------------

6.1 Cleanup: Floor areas with a spill or overspray will be slippery.
Remove or turn off all ignition sources. Ventilate well.
6.2 Waste Disposal: Do not puncture or incinerate container.
Depressurize; wrap can in newspaper and dispose in trash.

7.0 HEALTH HAZARD DATA / CAUTION
-----------------------

7.1 Effects of Overexposure to Concentrate:
Skin and Eyes: May cause irritation, depending upon degree of
-------------
exposure.
If Inhaled: Deliberate inhalation of concentrated product spray
----------
can be harmful or fatal. Excessive airborne concentrations may
cause breathing difficulties, dizziness or headaches.
-----------------------------------------------------------------------
8.0 FIRST AID /
--------------

8.1 Eyes: Flush immediately with cool running water. Remove contact
----
lenses, if used, and flush again.
8.2 Skin: Wash well with soap and water.
----
8.3 If Inhaled: If affected, move to fresh air.
----------

IN CASE OF DELIBERATE INHALATION OF PRODUCT, CALL A PHYSICIAN OR
THE 24-HOUR MEDICAL EMERGENCY NUMBER (800-328-0026) IMMEDIATELY
-----------------------------------------------------------------------
9.0 PROTECTIVE MEASURES /
------------------------

9.1 Avoid direct inhalation of spray. Use with adequate ventilation.
-----------------------------------------------------------------------
10.0 ADDITIONAL INFORMATION/PRECAUTIONS /
----------------------------------------

10.1 ORM-D (Air)
10.2 Purpose of 05/14/97 issue: Editorial revisions

KEEP OUT OF REACH OF CHILDREN

The above information is believed to be correct with respect to the
formula used to manufacture the product. As data, standards and
regulations change, and conditions of use and handling are beyond our
control, NO WARRANTY, EXPRESS OR IMPLIED, IS MADE AS TO THE
COMPLETENESS OR CONTINUING ACCURACY OF THIS INFORMATION.